Point Source
Very compact 8 inch coaxial point source loudspeaker. Usable as DJ monitor (DJM) with special minmal phase settings exclusively for DJ monitoring.
The state-of-the-art control technology uses the most advanced F.I.R. filters, providing extra fast minimal phase DJ monitor settings. These filters incorporate more than 20 years of development and research experience from one of the first designers ever to use F.I.R. filtering in such a comprehensive way that it affects not only phase, but also dispersion and spatial energy distribution.
The elaborate passive crossover guarantees an exceptionally flat frequency and phase response.
Technical Specifications
Transducers
- Low Frequency: 8-inch cone driver; 8 ohm nominal impedance
- Mid/High Frequency: 1.75-inch ring diaphragm compression drivers, 8 ohm nominal impedance
Coverage
- Vertical x Horizontal Coverage: 80° x 80°
Audio Performance
- Output @ 1 meter: 122 dB SPL ( 2 )
- Usable Frequency Range : 80 Hz – 22.1 kHz ( 1 )
- Free Field Frequency Response -6 dB: 73 Hz – 20.5 kHz
- Phase Response: 300 Hz – 22.1 kHz typical +/- 50°
- Sensitivity 1 Watt @ 1 Meter: 94.5 dB
Power Handling
- 800 Watt @ 8 Ohm (200 Watt AES) passive
- Maximum three Loudspeakers per Channel of a PAX 1604 or PCI 0244/0844 system amplifier
- Fixed 1,5m long connection cable
Mechanical
- 9,5 Kg, Multi Monitor Shape
- Durable hex stamped steel grille
- Baltic birch plywood, black coated
- size about (H x W x D in mm) 380 x 228 x 239
- Top and Bottom and side M8 insert for bracket
- ( 1 ) with special DJ monitor setting offering 122 dB SPL
- ( 2 ) SPL max peak, test signal: pink noise with a Peak to RMS ratio of 12 dB
Downloads