0810 BLI

Point Source

Very compact 8 inch coaxial point source loudspeaker. Designed for venues where short throw ( 3 ) sound reproduction is required or as near fill / delay line.

The state-of-the-art control technology uses the most advanced F.I.R. filters, providing standard and wide dispersion settings with absolute phase control. These filters incorporate more than 20 years of development and research experience from one of the first designers ever to use F.I.R. filtering in such a comprehensive way that it affects not only phase, but also dispersion and spatial energy distribution.

The elaborate passive crossover guarantees an exceptionally flat frequency and phase response.

Technical Specifications

Transducers

  • Low Frequency: 8-inch cone driver; 8 ohm nominal impedance
  • Mid/High Frequency: 1.75-inch ring diaphragm compression drivers, 8 ohm nominal impedance

Coverage

  • Vertical x Horizontal Coverage: 80° x 80°

Audio Performance

  • Output @ 1 meter: 121 dB SPL ( 2 )
  • Usable Frequency Range : 69 Hz – 22.1 kHz ( 1 )
  • Free Field Frequency Response -6 dB: 73 Hz – 20.5 kHz
  • Phase Response: 600 Hz – 22.1 kHz typical +/- 3° maximum 30°
  • Sensitivity 1 Watt @ 1 Meter: 94.5 dB

Power Handling

  • 800 Watt @ 8 Ohm (200 Watt AES) passive
  • Maximum three Loudspeakers per Channel of a PAX 1604 system amplifier
  • Fixed 1,5m long connection cable

Mechanical

  • 9,5 Kg, Multi Monitor Shape
  • Durable hex stamped steel grille
  • Baltic birch plywood, black coated
  • size about (H x W x D in mm) 380 x 228 x 239
  • Top and Bottom and side M8 insert for bracket
  • ( 1 ) with special full-range setting offering 105 dB @ 69 Hz
  • ( 2 ) SPL max peak, test signal: pink noise with a Peak to RMS ratio of 12 dB
  • ( 3 ) long throw = more than 35 m, medium trow = up to 45 m, short throw = maximum 15 m

Downloads

0810 BLI Datenblatt PDF